Ingenuity Precision powder trickler

[Rick300]

You can get +\- 0.01 pretty easily using the IP Trickler when controlled by either the AT V4 app or the IP Controller (box on left in pics). For example just reject the + 0.02 throws (dump a kernel from the IP cup, it’s fast), keeping the -0.02 and zero throws.

As for why upgrade to IP vs use AT V4, I think most folks like the IP trickler better, and the IP Controller is a plus IMO, a better algorithm and faster throw times. So quite a few folks are running a hybrid setup. And lots of other folks perfectly happy running straight AT V4. Both are outstanding.

Not necessarily. If you have an FX-120 then its resolution is +/- .02 grains. If you accept the target weight of .00 and -.02 that actually gives you a spread of .06

 

[MikeRu]

Not necessarily. If you have an FX-120 then its resolution is +/- .02 grains. If you accept the target weight of .00 and -.02 that actually gives you a spread of .06

Your correct its a larger number. I’m thinking that 32.00 on the Fx120i (which reads to nearest 0.02) means the actual weight is something like 31.991 to 32.009. And 31.98 could be as low as 31.971. So when accepting either .00 or -0.02, the true mass of a throw ranges from 31.971 to 32.009 or about 0.04, or +\- 1 kernel of Varget. Not bad.

 

[Backwardpioneer]

Thanks for all the input. I did locate a V3 on another site, but I'd still like a second as back-up. I plan on running it with my IP trickler. I'm more about consistency at a reasonable speed than just speed. I do try to load to .00, not +-.02 for competition, practice is ok +.02. Just my ADD. Any idea where to find a thick, clear top for the V3 w/a FX120i?

 

[MikeRu]

Thanks for all the input. I did locate a V3 on another site, but I'd still like a second as back-up. I plan on running it with my IP trickler. I'm more about consistency at a reasonable speed than just speed. I do try to load to .00, not +-.02 for competition, practice is ok +.02. Just my ADD. Any idea where to find a thick, clear top for the V3 w/a FX120i?

From JustDreaming

 

[Backwardpioneer]

Thanks for all your help!