• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

in need of instruction manual for New Hermes engraver

Just picked up a New Hermes , engraving machine . Model GTX. I need an instruction manual, user manual, what ever is available.
Also , if someone could send me a picture of jig to hold Barrel's and actions. I got a very brief 15 minute's of instruction. a manual for this machine would be very useful .
If anyone has a manual they don't need, or is willing to get a copy made, I will pay any fees involved.

Thanks, Ken Livengood
 
Pretty basic. Diamond scribes can be found here...

http://www.diamondtool.com/diaengrav.html

I prefer the 120 for barrels and 130 for smaller height text and smaller diameter stuff...

The arm is adustable for duplication ratio. I think for larger font, smaller the number. I set mine on 3.5 for barrels. Make sure all three locations are set on the same number. There is a scale on the arm, on the scribe holder and one that moves the entire arm back and forth.

I milled a Vee groove in my vise for barrels.

Line up your scribe to center of barrel and position your text where you want it to start and end. Put light downward pressure on scribe with one hand and trace the font with other. Quite simple.
 

Attachments

  • 1510350213-picsay.jpg
    1510350213-picsay.jpg
    214.4 KB · Views: 173
  • 20170204_130832-picsay.jpg
    20170204_130832-picsay.jpg
    432.3 KB · Views: 176
  • 20170721_185810-picsay.jpg
    20170721_185810-picsay.jpg
    119.4 KB · Views: 155
My engraver looks to be the same as Ken's. I made a vee block that fit the dowelpins of the vise. You will need something adjustable to hold the barrel hanging out the LH side of the engraver. I will loan you a set of instructions if you will PM an address. Jay Lynn sold 2 floor madels with elec motors and scratch capability with fonts at the Shilen Swap Meet yesterday for $600 ea. I believe he mnight stll have a couple desktop models left.
 
Butch
Could you pm me a phone number to contact Jay about the engravers he may have for sale
Mike Cockcroft
 
heres a manual for the models IM, mII, IL, ILK, ITFK, ITX, IRX, IRXK but its close enough to my TX that Ill say its for that one too.
Thanks to Butch Lambert for sending it to me.
 

Attachments

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,800
Messages
2,203,708
Members
79,130
Latest member
Jsawyer09
Back
Top