IMR 4895 for Dasher?

[jamesdmock]

I am getting low on Varget, but have some IMR 4895. Have any of you tried it in a 6mm Dasher with 105 class bullets? If so, what are your impressions. Thanks and good shooting.

 

[Intell]

I can’t say with the dasher, but last week I tried it in a 6BRA, I’m low on Varget also. I was able to get 2930 FPS with 107 SMKs and good groups.
im going to try and score some H4895 when I can find some. I’m just happy to burn up my IMR, I’ve had it way to long.

 

[bullseyeshtr]

I am using it in my dasher. Barrel loved it over Varget and RL-15. I am using 33.0 with moly 105 Gungnirs right at 3k velocity.

 

[longbow]

When I shot 6 dasher 4895 was the powder I used also......

 

[Old Navy]

I shoot some good groups with it in my BRA. Grain for grain the velocity is a little slower.

 

[Lefty Trigger]

With all the powder shortages people are trying new things, awesome! I have been trying different powders all summer and have found some new favorites that work really well and not the norm...

 

[mjeff23]

I've used H4895, N140 and N150 in my Dasher with great results. Tried IMR4166 with marginal results, but have read were others had really good results with it.

 

[KMart]

I am getting low on Varget, but have some IMR 4895. Have any of you tried it in a 6mm Dasher with 105 class bullets? If so, what are your impressions. Thanks and good shooting.

I get my best results with Hogdons 4895 in my Dasher. A little north of 31 grains with a 105 and that is about the top pressure wise for my rifle.

 

[Texas Solo]

I ran out of Varget, so I loaded some imr4895. At 31.0gr it shot just OK, nothing great. Didn't chrono it. Groups at 100 were .700". 31.3gr Varget has me at .300". I'm sure the imr4895 could do better if I were to actually develop it.

 

[762willdo]

Poor temp sensitivity