• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Hunter-Bench Class

aix

Hunter Class is, simply, Benchrest for score rather than group. There are more than one sub-disciplines but all are shot for score on targets completely different than the group targets that you see with the big black square. The rifles used were originally hunting types but they have evolved over the years to where they are now true Benchrest rifles although some features may differ.

If you go to the NBRSA and IBS web sites you can see the complete rules. They do differ between the two organizations.

Ray
 
One shot at each bullseye. 5 shots per match, 5 matches at each yardage for agg. 6X max scope power, 10 # gun with scope, 2.25" width forearm. 100, 200 and some 300 yard matches.

Mike
 
aix

Depends on the exact discipline. Most will be a 30 caliber with light,120 grain or less) bullets in a case of about 45 to 50 grains water. Many VFS,Varmint For Score) shooters use a 6PPC or something like it. Factory Class could be almost any cartridge.

Except for Factory Class, the rifle will look like a Benchrest Rifle because that's what it is.

Ray
 
Most use a 30-47 or 30-44. Based on 300 Savage brass. Now with the 6.5-47 Lapua, are changing to that parent brass. Need new reamers and dies of course. Bullet weights are from 112 to 150 all depending on twist.

Mike
 
aix, Here's a couple of pics of my Hunter rig which is pretty typical of what's being used. -Al

myhbrrig.jpg
[/IMG]
hbr2.jpg
[/IMG]
 
I've been fortunate to pick up some shooting and loading tips from Elzie Scott - a pretty darned good HBR shooter. Much of what he's shown me has been directly applicable to my .308 "tactical" rifle.

Absolutely amazes me the accuracy those HBR guys get with their fixed 6x scopes... :thumb:
 
HBR with those 6x scopes is mostly just luck.:rolleyes:

Only kidding guys!;);)

I built my first HBR rifle back in the mid 1990s and wasn't sure what kind of accuracy and precision I should expect from it because I had never shot an HBR match or even been to one. I happened to be at a Group Benchrest match in Raton where several HBR guys were shooting so I asked one of them who I knew well. He told me that my rifle had better be capable of shooting "ones" if I expected to be competitive. He was NOT exaggerating.:eek:

aix,

Consider this. The ten ring is a mere 1/2 inch in diameter and the X ring is a black dot. To win a tournament today, all of your shots have to be tens and most of them had damn well better be Xs.

Ray
 
That is one cool looking gun. I have thought of getting into a little bit of competative shooting and for some reason this discipline appeals to me. After reading the articles on this site it seems that the group shooters spend as much time with brass and load prep as they do shooting. I know that is probably not the case but how extensive is brass prep and load development with the HBR cartridges?
 
aix

Score shooting IS Benchrest. Case prep and loading is just as time consuming as it is for any other benchrest shooting, whether it be point blank or long range.

Ray
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,800
Messages
2,203,707
Members
79,130
Latest member
Jsawyer09
Back
Top