How to adjust Kelbly trigger

[maxpower]

I have a new (well second hand but new to me) Kelbly trigger but cant find instructions on where to move the plunger to adjust trigger weight. Does anyone have any instructions? BTW, I am after 6-8 oz pull weight.

 

[JohnKielly]

Seems Kelby doesn't list this item any more (or not at least on the page of their website that it used to be). This might help a bit: http://bulletin.accurateshooter.com/2007/07/jewell-and-kelbly-triggers-compared/

 

[maxpower]

Seems Kelby doesn't list this item any more (or not at least on the page of their website that it used to be). This might help a bit: http://bulletin.accurateshooter.com/2007/07/jewell-and-kelbly-triggers-compared/

Thanks for the link John. When he moved the pin to the 2nd position, was it 2nd from front or 2nd from rear?

 

[3081FTR]

Instructions from Kelbly

 

[maxpower]

Instructions from Kelbly

Much appreciated 308IFTR, this is just what I was after. Thanks.

 

[X-Caveman]

Be very careful if you choose to try position #4. Mine won't stay cocked there. It occasionally drops the firing pin when closing the bolt. Positions 1-3 are fine.

 

[ridgeway]

Contact Kelbly...they will send you different length pins for various actions. I know I had to experiment a little with different pins on a 40x action.

 

[X-Caveman]

Contact Kelbly...they will send you different length pins for various actions. I know I had to experiment a little with different pins on a 40x action.

I did. They told me to stay out of the 4th hole (Panda) and sent me some heavier springs at no charge.