Yes No turn, .272 neck. Wanted to use the expander ball perhaps a thou or so to get proper tensionUnless your necks were turned to 8.5thou thickness, .266 was likely correct (for ~12thou thickness).
Yes No turn, .272 neck. Wanted to use the expander ball perhaps a thou or so to get proper tensionUnless your necks were turned to 8.5thou thickness, .266 was likely correct (for ~12thou thickness).
I believe they are quality dies. And customer service seems great so far. What I'm most impressed with is the seater die. Ive only used it for 50 loads but they all measured +/- .0005 length to ogive. (It could also be that the Berger bullets are more consistent than what I've been using in 6.5cm).I use a Foster for my 6xc and am very happy.
I turn necks to .267 XC die is .264. It fits my needs perfectly.
Any help appreciated. Have Forster full length sizing die. Sizing new (un turned) Lapua brass, sized neck measures .258 loaded round neck measures .269.