Hornady bump gauge insert

[Jase PTRC]

Can someone tell me which comparator insert i need to use for 6 x 47 lapua in my hornady bump gauge?

 

[DennisH]

It should be the 400 insert.

See if you can pull up the following:

http://www.sinclairintl.com/userdocs/Miscellaneous/hornadygaugebushingchart.pdf

Dennis

 

[Jase PTRC]

It wont come up will try with the .400 though and see how i go.

 

[jray57]

Print shows headspace measurement as well as datum point on shoulder@ .375

 

[DennisH]

It wont come up will try with the .400 though and see how i go.

It's a PDF attachment with good info if you can get someone to pull it up.

 

[jray57]

Here you go. Don't see the 6X47 lapua, refer to reamer print above.

 

[XBBR Shooter]

Print shows headspace measurement as well as datum point on shoulder@ .375

Here you go - a .jpg