Help with Remington 40-X Stock

[Steve1984]

I recently acquired a nice Remington 40-XB and was hoping to get some information about who might have made the stock and butt plate assembly as I would like to get a hooked butt plate for it. The original owner is not available to answer questions due to health reasons, so any information is appreciated. Some addition information: the serial number is in the 400xx range, there is no safety, the trigger pull is in the 2-4 oz range and the barrel date code is not visible (I haven't removed the stock yet to see if it's just hidden).
Thanks, Steve

 

[Albany Mountain]

Doesn't look like the Remington stock sold as International 40X (rimfire or Centerfire) as they were laminated. However single shot actions put in these usually had a 2 oz trigger of Hart design. The trigger was mounted on a hanger that allowed some adjustment to the front or rear and had no safety. The buttplate and handstop assembly looks different than the canjar/dunlap ones used on the early Internationals.

 

[Steve1984]

Thank you for the information.
I removed the stock. I don't see any barrel date code and the trigger is different.