Help with ADL Conversion

[C.E.Smith043]

I am going to convert my BDL to ADL. Other than the obvious trigger gaurd, what else do I need to purchase to make this conversion?

Trigger Gaurd Screws?
Mag Box?
Mag Box Screw?
Different Mag Box Spring?

 

[jackson1]

Just refinished my custom stocked 700 ADL. Believe you need a trigger guard and correct length action screws. The magazine box and spring should work with your inletting. Remove the spring from the floor plate. Hope that helps. ADL's are kind of a rarity these days, but they work fine for me.

 

[JohnHenry]

I am going to convert my BDL to ADL. Other than the obvious trigger gaurd, what else do I need to purchase to make this conversion?

Trigger Gaurd Screws?
Mag Box?
Mag Box Screw?
Different Mag Box Spring?

Will need stock inletted for a blind magazine and an ADL trigger guard. Will need new mag box and tab screw. Follower spring is OK if caliber is in the 223 family. The ADL and BDL follower springs for the 243/308 family have different part numbers. Obviously need an ADL trigger guard and the front guard screw.
Note: I assumed you have a short action Rem. 700.

 

[C.E.Smith043]

Will need stock inletted for a blind magazine and an ADL trigger guard. Will need new mag box and tab screw. Follower spring is OK if caliber is in the 223 family. The ADL and BDL follower springs for the 243/308 family have different part numbers. Obviously need an ADL trigger guard and the front guard screw.
Note: I assumed you have a short action Rem. 700.

Yes sorry. I should have noted that. Its a rem 700 bdl that im changing over to adl in a bell carlson LVSF stock. Its a .308

 

[Dusty Stevens]

You need a mag box, screw, follower and trigger guard