Help ID on power shell holder

[Baddog0302]

I have a shell holder with the power screw driver adapter stem. The head of the stem {the part that hits the case head] has a two step slug that is ment to fit in the primer pocket and help center the case in the shell holder. There are no markings on the body, just the # 1 in front of the slot where the case head fits into the body.

 

[Dusty Stevens]

If its all stainless and knurled its probably sinclair. They made rounded and square parts that hit the primer pocket. If it has wrench flats and is black its probably k&m but those that ive seen are just flat where they hit the back of the case

 

[Baddog0302]

Dusty, thanks, it is a Sinclair,bummer, they are out of their # 2 shell holder

 

[Dusty Stevens]

Get yourself a k&m so you can just use lee shellholders. Itll fit anything anytime.

 

[nmkid]

I have the black one with the #2 on the shellholder. Any use?

 

[nmkid]

I have the black one with the #2 shellholder. Any use?

 

[Dusty Stevens]

Sinclair, k&m, and 2 home made drivers. The sinclair sees the least use even tho its made for a ppc and what i turn 99.9% of the time. You can see how much the brass spun the one time i used it til i could get something else