Having a problem

[vmthtr]

Used a Burris Sig ring set up last year for Doggin and ran out of adjustment at 1000. Had a 20 in front and a 20 in rear. I could get '0' at 100 with this. I switched to a 20 MOA base and same rings to get the 1000 yard dog this year. Problem now is I cannot get a 100 yard zero. It is like 13 inches high or so. Swapped everything back and will try again. Any ideas?

Mike

 

[vmthtr]

I did switch the ring inserts around, used "0", 5 and 10's to tilt scope up, and muzzle down, and still high.

Mike

 

[jb1000br]

premier reticle with added aiming points below/above center, or a scope with more internal elevation.

your scope must not have much elevation.

what scope?

JB

 

[vmthtr]

Have a Weaver 6-24X on it.

Mike