Have a Question

[majestic7usa]

Hi all. I am new to the forum, and have a question about reloading DIES.
What would be the reason for, Or advantage of Using 300 WSM hand dies with a .308 diameter neck bushing, to load 7 mm WSM????? As oposed to just using a standard set of 7mm WSM Dies? Thanks and good to meet you all. Steve

 

[HillbillySniper]

It sounds like you miss understood whoever told you about the die. They probably meant for you to git a 300 WSM type s bushing die and the proper bushing to help you adjust the neck tension on your 7 WSM. I use a 300 WSM with the bushing to adjust the tension on my 25/300WSM. Hope this helps you.

Hillbilly

 

[majestic7usa]

It was in an article on 6 mm Benchrest.com... I now see what the deal is. He was using 300 WSM BRASS to make the Brass for his 7 mm WSM, Also he used the 300 WSM dies with .308 bushings to form them down to the 7 mm. You can also use this type of Die / bushing to adjust the neck tension for different ussages i e target/ hunting. So my question has been answered. Thank you all...