GLASS BED
- Thread starter Webster
- Start date
you bet, but if the rifle shot well before, dont change anything under the action/aroung the recoil lug,
clean out the area under the chamber in front of the recoil lug and then rebed the first 1.5-2" under the chamber being sure the rest of the bbl is clear.
When you do, be sure to tighten the action screws as if you were going to shoot the gun, thus the beding under the bbl wil match the action position that you have had all along.
Bob
clean out the area under the chamber in front of the recoil lug and then rebed the first 1.5-2" under the chamber being sure the rest of the bbl is clear.
When you do, be sure to tighten the action screws as if you were going to shoot the gun, thus the beding under the bbl wil match the action position that you have had all along.
Bob
,It's the 2nd. barrel after the original. I quit hunting and shooting for about 15 yrs. I started shooting again last summer. I got tired of driving 85 miles to where I liked to hunt. I prefer rural hilly areas for safety reasons and less competition. It's 40 miles to my rifle range. My hunting buddies started having lots of kids so I had to hunt by myself.
The first two barrels were 6mm Rem. now 6BR. I had over 5000 shoots threw the first two barrels with about .75 to 1" groups. This was good enough for my GH hunting out to 350 yds. I decided to quit hording my money and put a Krieger barrel and 6mmBR on the rifle. My next step should be to throw out the Rem stock and buy a custom fiber glass one. It's hard to hold the gun still if you are trying to shoot groups 1/2" or smaller. The rifle is intended for GH and I hope to nail a coyote that's dumb enough to walk across a hayfield in the afternoon.
The first two barrels were 6mm Rem. now 6BR. I had over 5000 shoots threw the first two barrels with about .75 to 1" groups. This was good enough for my GH hunting out to 350 yds. I decided to quit hording my money and put a Krieger barrel and 6mmBR on the rifle. My next step should be to throw out the Rem stock and buy a custom fiber glass one. It's hard to hold the gun still if you are trying to shoot groups 1/2" or smaller. The rifle is intended for GH and I hope to nail a coyote that's dumb enough to walk across a hayfield in the afternoon.
ab_bentley
I fix stuff, sometimes....
The thread is from 2010...
stacy
2 TIMOTHY 2 VERSE 15
AB HE MAY BE STILL REBEDING THE RIFLE 6YRS LATER MAY BE PUTTING ON A NEW BARREL BY NOW !!!!!!!!
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.