Greetings all,
I went to the range last W/E with the latest refinement to my 6mmBR load with the goal of shooting a 1" group at 400yds. After fouling the barrel and just settling in for about 10 shots, I started to seriously try for my goal with four 3 shot groups. Three of the groups ranged from 1 to 1 5/8", the 4th one was ruined by a flinch. Then I got real serious and started shooting 5 shot groups. They varied from 2 3/8 to 4 5/8". I noticed the wind was picking up. The wind was basically blowing up range all day, swinging the 2 foot long surveyors tape tail on my home made wind vane from about 30 deg left of straight down range to about 30 deg right. I tried waiting for calmer periods during the last 2 groups with no real improvement in group size.
So my question is - will the observed wind, 30 degrees left and right of center, blowing a 2' piece of surveyors tape about 60 degrees up from vertical, increase my group size from 1.5 " to 3 "? The load was 6mmBR with the Horn 87gr VMax. Please tell me how sure you are of your advise.
Thanks in advance for any input. Hanic
I went to the range last W/E with the latest refinement to my 6mmBR load with the goal of shooting a 1" group at 400yds. After fouling the barrel and just settling in for about 10 shots, I started to seriously try for my goal with four 3 shot groups. Three of the groups ranged from 1 to 1 5/8", the 4th one was ruined by a flinch. Then I got real serious and started shooting 5 shot groups. They varied from 2 3/8 to 4 5/8". I noticed the wind was picking up. The wind was basically blowing up range all day, swinging the 2 foot long surveyors tape tail on my home made wind vane from about 30 deg left of straight down range to about 30 deg right. I tried waiting for calmer periods during the last 2 groups with no real improvement in group size.
So my question is - will the observed wind, 30 degrees left and right of center, blowing a 2' piece of surveyors tape about 60 degrees up from vertical, increase my group size from 1.5 " to 3 "? The load was 6mmBR with the Horn 87gr VMax. Please tell me how sure you are of your advise.
Thanks in advance for any input. Hanic