E.P.S. bullets

[nmkid]

Any folks shooting or have shot the EPS 106 gr 6mm bullet? I ordered a few but, I don't seem to hear anything about them.

 

[skiutah02]

They work very well in my 6brx.

http://forum.accurateshooter.com/threads/fs-1000-106-eps-6mm-projectiles.3900939/

Drew

 

[jghoghunter]

I shoot Jamie's bullets and they work great with NOOOOOO sorting.

 

[nmkid]

Well, I was going to shoot some today but, my plans got derailed. I too measured some of the ones I got and after 15 bullets I stopped. Waste of time. As "jqhoghunter" states...Noooo sorting.

 

[JEFFPPC]

Well, I was going to shoot some today but, my plans got derailed. I too measured some of the ones I got and after 15 bullets I stopped. Waste of time. As "jqhoghunter" states...Noooo sorting.

I have been shooting the EPS 106 6mm bullets since they became available. I have had success from 100 yds to 1000 yds with them. I have shot about 8000 of them. I no longer sort and weigh. They are spot on....every bullet. I routinely shoot in the .1's and low 2's at 100 yds with them. I have often commented,"Shoots like my PPC"s. I almost hate to tell how much I lilke them, I don't want my competition to go to them! LOL.

 

[nmkid]

Well, I got to shoot the EPS bullets today. All I'm going to say is I'm ordering 500 today!!

 

[Terry]

Bought my first 1,000 several months ago. Ordered 2,000 more upon shooting them.

 

[Loggins J]

I won light gun score a the ibs 1000 yard nationals last year with them

 

[xdeano]

I got a box from a friend to try a few months back. I typically shoot the 105 Berger hunting vld. I did a side by side measurment comparison and the eps is so consistent bullet to bullet I wouldn't waste my time in sorting for weight, bearing surface or ogive. They're on the money. Just for s&g I loaded them with the exact same charge as the 105 Berger and boy did they shoot.

I then decided to shoot some coyotes with them. I can tell you that are a great paper bullet, but they did not open up very well on fur. They penciled right through.

Excellent bullet though, worth the money.
Deano

 

[dragman]

Absolutely great bullet!!!!

 

[skiutah02]

I measured my first 500 and that was a waste of time. They all measured the same in every dimension I am able to measure (pressure ring, bearing surface, BTO) with the exception of bullet OAL. That was fixed by trimming and tipping. Drew

 

[James EPS]

Thanks guys for using my bullets, I'm glad to see so many of you having success
James Eazor

Here is a photo of the bullets I make, Top-Bottom 30 cal 116gr FB ,118gr FB, 118gr BT, 106gr BT 6mm, 136gr BT 6.5 and 210gr BT 30 cal.

 

[Loggins J]

Thanks guys for using my bullets, I'm glad to see so many of you having success
James Eazor

Here is a photo of the bullets I make, Top-Bottom 30 cal 116gr FB ,118gr FB, 118gr BT, 106gr BT 6mm, 136gr BT 6.5 and 210gr BT 30 cal.

If you want a good bullet try his i did and will keep shooting them can't go wrong just pull them out of the bag and load them no need in sorting them I won more with his bullets then all the rest thank you James

 

[Hoier]

Do you know what your BC is on the 106 and the 136?

 

[DBLNUT]

I sent an email to Jamie asking the same question, This is what Jamie sent to me a few days ago for the 6MM's.



I had them tested unpointed years ago at .569 @3000 fps so if you are shooting them slower it will be closer to. 550

 

[Hoier]

Cool thanks man, I'd like to know on the 136 also since I mainly shoot a 6.5x47.