Dimensions for Rem-Age tennon

[Shawnba67]

Can any one point me towards the dimensions for a rem-age tennon? Or at least the thread length? They don't seem to extend past the nut so there seems to be a spec for threads and for barrel diameter at that length ?? Or am I overthinking it? Thanks much

 

[hoz53]

Can any one point me towards the dimensions for a rem-age tennon? Or at least the thread length? They don't seem to extend past the nut so there seems to be a spec for threads and for barrel diameter at that length ?? Or am I overthinking it? Thanks much

Obviously thread is same as any Remington 700--1.060x16 Thread length on mine is 1 1/2"--it doesn't have to be any specific length as long as it's long enough so the nut threads far enough on to get your head space right. The nut has an unthreaded portion to cover the threads so it looks better.

 

[boltman223]

Obviously thread is same as any Remington 700--1.060x18 or 1-1/16-18. Thread length on mine is 1 1/2"--it doesn't have to be any specific length as long as it's long enough so the nut threads far enough on to get your head space right. The nut has an unthreaded portion to cover the threads so it looks better

Remington's are 16 TPI.

 

[hoz53]

Remington's are 16 TPI.

Thanks that's right

 

[Taildrag15X]

Thread needs to be longer if you run a thick aftermarket recoil lug, or relieve some thread from the nut (which I did) as it was easier.