• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Cleaning brass

Just used my new Frankford Arsenal rotary case (wet) brass tumbler with Brass juice! WOW!!!!! I didn't even use pins!! The brass lookes like new in 2 hrs! Could not be more satisfied! If oyu havn't tried Brass Juice, you should!
 

Attachments

  • 20210303_104448_HDR.jpg
    20210303_104448_HDR.jpg
    577.2 KB · Views: 46
Switched to wet tumbling my brass about 5 years ago after using dry media for 25+ years , will never go back to dry . Just looked up Brass Juice , Bo you dump the water or reuse as some have poster , water must be pretty dirty. I'm not cleaning alot at a time , I have a single drum Harbor Freight tumbler for 50 45ACP cases and a Tumblers B Tumbler for larger cleanings. Used with SS Pins ,LemiShine and Dish Detergent.
 
Switched to wet tumbling my brass about 5 years ago after using dry media for 25+ years , will never go back to dry . Just looked up Brass Juice , Bo you dump the water or reuse as some have poster , water must be pretty dirty. I'm not cleaning alot at a time , I have a single drum Harbor Freight tumbler for 50 45ACP cases and a Tumblers B Tumbler for larger cleanings. Used with SS Pins ,LemiShine and Dish Detergent.
Same for me, been dry vibrating for 20+ years but after today it's over ! I read all the stuff on leme shine and dawn and ordered some but then I saw a video on Brass juice, so my fist time I thought I would try it. Like I said didn't use pins and it was super easy! Some say they reuse the water but you only use like an ounce to the gallon so it's pretty cheap. BTW there were no water spots.
 
Sounds interesting, been using Pins, Dawn and Lemon Shine. You Guys got a link to the You Tube video that?
 
I ordered last night , I think I still use with the pins but instead of running the tumbler for two hours , I'll see how it cleans in one hour . From the videos it looks like you don't have to let it run for hours. Will let you know how it goes. I like trying good cleaners , come to think of it I have my share of dies and holsters too. Thanks for posting.
Chris
 
If the SS pins are not required for Brass Juice to clean brass in a tumbler, my guess is that it would work well in an ultrasonic cleaner. Thanks for the info.
 
I don't know about wet tumbling, but in my cheap ultrasonic cleaner a 50/50 mix of water and vinegar with one or two drops of dawn dishwater detergent leaves my brass spotless after 15-20 minutes. Even the primer pockets are completely clean! My regime right now is to do the ultrasonic cleaning after thrice shot brass and then do the dry tumbler to shine the brass up.
 
I don't know about wet tumbling, but in my cheap ultrasonic cleaner a 50/50 mix of water and vinegar with one or two drops of dawn dishwater detergent leaves my brass spotless after 15-20 minutes. Even the primer pockets are completely clean! My regime right now is to do the ultrasonic cleaning after thrice shot brass and then do the dry tumbler to shine the brass up.
Yes. This works well. I do about the same but use dry lube (RCBS) in the necks of freshly clean to make seating easier.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,853
Messages
2,204,657
Members
79,160
Latest member
Zardek
Back
Top