• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

cheep press for decaping

i'm very tired of taking my rockchucker apart to clean primer junk from the ram ever time. what cheep o frame press has a good spent primer management?
 
I bought a cheap Lee several years ago on ebay for that very purpose. Clamped it on my reloading table. The spent primer drops into a recess in the body. When it fills up, I remove clamps, turn it upside down over the trash can, and spent primers are gone. No residue on my Rockchucker. BTW, do not try reloading with this cheap Lee. It wobbles all over the place.
 
I have a Lee "C" frame press with the cavity in the frame. I mounted it on the end of my bench and drilled a hole through my bench under the cavity and put a piece of vinyl tubing in it to direct primers into a trash can.
 
I have another Brand New one, I could send you for $35 shipped, if interested ?
It works out great for me.
 
Well i have a harvey deprimer. I like to decap at the range. I clean my brass with a rag dampened with ballistol and decap while others are posting targets or i am waiting for my barrel to cool.

When i have a bunch to do i have a little partner press bolted to a picnic table outside. Use a universal decapper.
 
I use the frankford arsenal hand held decapper, works pretty good, easy to set up and use. does require grip strength where the press would be easier.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,857
Messages
2,224,545
Members
79,999
Latest member
Snype97
Back
Top