Chamber Plug Advice Needed

[lgwatson]

I need to soak some barrels to deep clean. I have sinclair chamber plugs for 223 Remington and 308 sizes. I need plugs for 22/6BR and 6X47 Lapua. Any suggestions would be appreciated.

 

[lgwatson]

I need to soak some barrels to deep clean. I have sinclair chamber plugs for 223 Remington and 308 sizes. I need plugs for 22/6BR and 6X47 Lapua. Any suggestions would be appreciated.

I am unable to find other sizes.

 

[AlNyhus]

"The Plug" - Barrel Cleaning Aid

The Plug is the easiest way to seal and clean rifle barrels.

patriotvalleyarms.com

 

[lgwatson]

Found plugs for 308 family and 6BR family. I need one for 6X47 Lapua.

 

[lgwatson]

Found plugs at Duracoat Firearm Finishes (online).

 

[lgwatson]

Found plugs at Duracoat Firearm Finishes (online).

DuraCoat Firearm Finishes

duracoatfirearmfinishes.com

 

[Just Say Moe]

I didn't know the PVA ones existed but I shortened Sinclair ones by trial and error a 308 for BR and a 223 for a 20VT.

 

[Texas Solo]

"The Plug" - Barrel Cleaning Aid

The Plug is the easiest way to seal and clean rifle barrels.

patriotvalleyarms.com

I had one of these for 6 Dasher.
It leaked terribly. I sent it back.

 

[C.E.Smith043]

Why not plug the muzzle end and soak it with the muzzle down

 

[jpx2rk]

Why not plug the muzzle end and soak it with the muzzle down

Link or how to for a muzzle plug that doesn't leak??

 

[Murray Brook]

I used a tight fitting ballon, with a pipe clamp. Used a leather piece between the barrel and pipe clamp so as to not mark the barrel. Worked good.

 

[C.E.Smith043]

Link or how to for a muzzle plug that doesn't leak??

U can use a small black rubber cork from Ace Hardware