• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

CFE 223 in a 7TCU?

HandgunHTR

Gold $$ Contributor
I have a 7TCU pistol barrel for my Encore (12"), one for my Contender (14"), and a Remage bolt gun in that chambering as well. I have good loads for all of them, but with things being the way they are, I am contemplating finding some loads that use other powders (my go to's are 8208 XBR and H4198) that may be easier to find. I have seen CFE 223 available recently and I have also heard good things about its copper fouling resistant properties. This is also a powder that I can use in my 6.5 Grendel and 6.8 SPC guns.
So, anyone have any load data that they would like to share?
 
I have a 7TCU pistol barrel for my Encore (12"), one for my Contender (14"), and a Remage bolt gun in that chambering as well. I have good loads for all of them, but with things being the way they are, I am contemplating finding some loads that use other powders (my go to's are 8208 XBR and H4198) that may be easier to find. I have seen CFE 223 available recently and I have also heard good things about its copper fouling resistant properties. This is also a powder that I can use in my 6.5 Grendel and 6.8 SPC guns.
So, anyone have any load data that they would like to share?
CFE223 isn't listed by either Hodgdon or Hornady (9th Edition) for your 7TCU. Maybe other sources have the data.
 
There has not been ANY NEW data for a longgggg time.
It’s a wildcat, so I would have some one with one of the programs run the numbers and go from there.
I would be more inclined to lean towards 4895 or 335.
 
Take a look in the new 6th Edition Sierra manual. Or their online app. There is quite a bit of info for the Contender, 12+14 inch lengths. Their Most Accurate offerings include H4895, H335 and A 2460 across a wide selection of bullet weight.
Other info also include VV 130+133 and A 2015
CFE223 is not listed at all. Evidently it is too slow for their liking.
Other powders that should be looked at (quick load) would be 3031, Lt-32, Benchmark, RE 10x, and AR Comp
Several of the powders listed above, show up retailers fairly often.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,277
Messages
2,215,459
Members
79,508
Latest member
Jsm4425
Back
Top