CCI BR-4 for Dasher?

[ledward]

I was wondering if anyone uses the CCI BR-4 in the dasher? My supply of 450's is getting low and they are just about impossible to find in Canada. I have a line on a case of BR-4's and was wondering it they are worth trying. Might be a case of beggars can't be choosers but I would like to hear if people are having success with them.
Thanks in advance.

 

[potatoe]

Of course. That's all I ever used was BR-4's they work great, nice ES and handle high pressures.

 

[22DASHER]

They will work great. I wouldn't worry about it one bit...

 

[6xcshooter]

at around $50 to $60 per 1000 it aint worth it

 

[potatoe]

He's not asking about economics, he's asking about performance

 

[3dogs]

BR 4's work great in my Dasher
Jim

 

[ledward]

Thanks for the replys.

 

[6mmcldasher]

http://www.cabelas.ca/product/13139/cci-primers.
They have both , BR4's are 7.99 / 100 up here.

 

[normmatzen]

When I first got my 6BRX I couldn't find any Wolf SRM primers so I used BR-4's.
Finally Wolf became available again so I tested both and found absolutely no difference in accuracy between BR-4 and Wolf SRM. Except of course that BR-4's cost TWICE as much as Wolf!

 

[Drop Port]

No different than any other cartridge, one of three things will happen, they will shoot better, the same or worse. It's only speculation until you try them. I would borrow a few and give them a try.