• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Case lube

Link

Link

Silver $$ Contributor
I have tried some products. This seems to work the best for me. Lay my cases on a pad, light spray. roll em over 1/2
way another light spray, roll em back in forth on the pad then clean before sizing. RCBS case slick.
1753104199083.png
 
HTSmith said:
How is it to get off the cases? Sticky?
Click to expand...
No It has a slight oily film on them after resizing. I take about 10 of them and hold them in a clean rag and rub the bunch together. I have tried several aerosol types, and they are no where near as good. I have about 20 firings on some 6br brass and now they are getting a slight bolt click upon extraction. Maybe it's the lube. ;]
Those are the ones I run through the 30 06 die to catch the .2 line. Then they are good for about 4 firings before I do it again.
 
This has been hashed over before, at least once I know of. What works and you like is the best. I have used imperial for all my rifle loading for years and it has worked well for me. But the last time this was discussed, Royal was mentioned several times with high marks. I got a jar to try it, and I found it seemed to size a little easier, smoother, is a bit thinner, I think body heat thins it a bit, and it sized very consistent just like everyone had said.
Now I'm a royal fan.
 
rlporter507 said:
This has been hashed over before, at least once I know of. What works and you like is the best. I have used imperial for all my rifle loading for years and it has worked well for me. But the last time this was discussed, Royal was mentioned several times with high marks. I got a jar to try it, and I found it seemed to size a little easier, smoother, is a bit thinner, I think body heat thins it a bit, and it sized very consistent just like everyone had said.
Now I'm a royal fan.
Click to expand...
Best case lube ive used is royal. Comes of easily and super slick. When imperial chattered in the die during forming royal did not. Have the tub, aerosol, and pump. Prefer pump
 
SeabeeKen said:
Best case lube ive used is royal. Comes of easily and super slick. When imperial chattered in the die during forming royal did not. Have the tub, aerosol, and pump. Prefer pump
Click to expand...
I use Imperial, never had chattering. I barely touch my fingers in the lube and take lube out of the fridge before using..
 
SeabeeKen said:
Best case lube ive used is royal. Comes of easily and super slick. When imperial chattered in the die during forming royal did not. Have the tub, aerosol, and pump. Prefer pump
Click to expand...
On .441" based cases, I run them through a Sgt of Arms base die. All of my .441" based cases (6.5 Grendel and 6ARC) are semis and get fat bottoms. Royal is the best there, and it can be tough as the .200" line of Lapua or AA (same thing) brass is hard.

Royal is sticky though.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,894
Messages
2,205,801
Members
79,196
Latest member
pkitrinos01

Share This Page

Back
Top