Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I wish you were correctIf they put out a 10/22 in .22 hornet.... it would fly off the shelves!
You can Polish ( With, 400 then, 600 Grit on, a Dowel ) the Radius on, the back end of the "Bolt" and BUY Rubber "Buffer Tubes" that, go OVER the REAR Steel, Pin, that will, STOP, the pin from, "beating out", the receiver, look on, E-Bay. ( The rubber TAKES, the "Beating" NOT the Pin )I would say the pin in the rear takes the beating, possibly enlarging the pin hole horizontally.