SELLING Bullet sorting tool

Folks I will have 4 more tools available for shipment next week. These tools are grey in color and not black as pictured. First come first served.

Please post on here that you want one and then PM me for payment/shipping details.

If there is more interest in the bullet sorting tool I can have more ready to ship within 7-10 days.
 
lawrence97 said:
If you are only going to sort by one measurement then the OAL of the bullet seems to be the way to go. You can also sort by bearing surface, base to ogive, etc and it is more time consuming with minimal returns or impact on target.

I have been sorting by OAL using a set of calipers but it’s time consuming and requires care when placing the bullet on the caliper.

This tool will make sorting bullets a breeze and it won’t break the bank since it is 3D printed. It is comfortable to hold and quick to measure. I have measured .22(80.5, 85.5), 6mm(103,105,107,108) and 7mm(180 and 184) bullets and it has plenty of room for longer bullets. This design is best for longer high BC bullets. If you are trying to sort short range or shorter bullets the design of the v-block needs to change and be made shorter. It’s hard to design something that will accommodate from the shortest to longest bullets which is why I settled for what is mostly used in mid and long range.

The price for the tool as pictured is $110 shipped via USPS.

Folks I will have 4 more tools available for shipment next week. These tools are grey in color and not black as pictured. First come first served.

Please post on here that you want one and then PM me for payment/shipping details.

If there is more interest in the bullet sorting tool I can have more ready to ship within 7-10 days.
Click to expand...
Hi there how do I get my hand on one of these as I live in Australia
 
Is sorting by OAL better than the ogive? I thought the ogive was the better way to do it?

I've been sorting by the ogive the last few years and it seems to be doing better for me. Takes a bit of time with calipers and the hornady bullet comparator though.

Might have to get me one of these new tools to speed up the process.
 
I bought one of these a few months ago and I’ve used it on everything I load for since.

There’s definitely a difference in accuracy but more so in “forgiveness”. When I think I threw one it doesn’t seem to be as far off as think it’s going to be.

Using this tool has definitely improved my scores and Lawrence is gtg
 
lawrence97 said:
If you are only going to sort by one measurement then the OAL of the bullet seems to be the way to go. You can also sort by bearing surface, base to ogive, etc and it is more time consuming with minimal returns or impact on target.

I have been sorting by OAL using a set of calipers but it’s time consuming and requires care when placing the bullet on the caliper.

This tool will make sorting bullets a breeze and it won’t break the bank since it is 3D printed. It is comfortable to hold and quick to measure. I have measured .22(80.5, 85.5), 6mm(103,105,107,108) and 7mm(180 and 184) bullets and it has plenty of room for longer bullets. This design is best for longer high BC bullets. If you are trying to sort short range or shorter bullets the design of the v-block needs to change and be made shorter. It’s hard to design something that will accommodate from the shortest to longest bullets which is why I settled for what is mostly used in mid and long range.

The price for the tool as pictured is $115 shipped via USPS.

Folks I will have tools made based on orders. These tools are red in color and not black as pictured. First come first served.

Please post on here that you want one and then PM me for payment/shipping details.

If there is more interest in the bullet sorting tool I can have more ready to ship within 7-10 days.
Click to expand...
Yes I want one
 
lawrence97 said:
If you are only going to sort by one measurement then the OAL of the bullet seems to be the way to go. You can also sort by bearing surface, base to ogive, etc and it is more time consuming with minimal returns or impact on target.

I have been sorting by OAL using a set of calipers but it’s time consuming and requires care when placing the bullet on the caliper.

This tool will make sorting bullets a breeze and it won’t break the bank since it is 3D printed. It is comfortable to hold and quick to measure. I have measured .22(80.5, 85.5), 6mm(103,105,107,108) and 7mm(180 and 184) bullets and it has plenty of room for longer bullets. This design is best for longer high BC bullets. If you are trying to sort short range or shorter bullets the design of the v-block needs to change and be made shorter. It’s hard to design something that will accommodate from the shortest to longest bullets which is why I settled for what is mostly used in mid and long range.

The price for the tool as pictured is $115 shipped via USPS.

Folks I will have tools made based on orders. These tools are red in color and not black as pictured. First come first served.

Please post on here that you want one and then PM me for payment/shipping details.

If there is more interest in the bullet sorting tool I can have more ready to ship within 7-10 days.
Click to expand...
I'd like one, send me the info if you still have them
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,581
Messages
2,198,497
Members
78,962
Latest member
KennethPlesner

Share This Page

Back
Top