SELLING Bullet Jacket Loading System

[ridgeway]

I a 3d printed jacket loading systems ready to ship. The 6mm will handle up to 1.150 long jackets and will hold 210 jackets per tray. Also available in 6.5mm and 30cal

The system consists of three plates, top funnel, middle guide plate and base plate. Below the funnel is a drop slide plate and a removable fence on top of funnel plate. The system uses 2 pins to align the stack up. All jackets are dumped on top and most will fall into the funnel base down. Some will need situated correctly. Once ready, remove slide to allow jackets to drop into base. Close the slide and dump cores. Once all holes are filled, remove the slide plate and all cores will drop and load into the jackets. Remove base plate and attach another. Repeat. Then happy core seating! These are made out of PETG, which is more resistant to heat and chemicals.

NEW PRICING IN #13 THREAD. THESE NEED TO GO!

Additional base plates can be used with the upper loading system. The base is .500 thick and .400 deep holes. Simple way to add capacity.

PM me for any details or questions. I do have a video on how it works, pm me for that. I can send via text.

 

[ridgeway]

All emails answered!

 

[AlNyhus]

Thanks to @ridgeway for a much needed product for bullet makers. A real time saver....love mine.

 

[ridgeway]

For those that would prefer a 50 or 100 hole system...I can make them to order. Here is a model of a 100 round version(6-5/8x6-5/8).

I am making myself a 100 round model and will post when I get all the parts printed. I am looking at a price point of $125 for the system and $50 for additional base.

These will be nice when making test lots.

 

[ridgeway]

I have 2 6mm 210 hole and one 30 cal left.

I have one 100 hole system finished and ready to ship. Extra compatible(with upper system) base plates are available on order. Order multiple extra bases...we can work a deal. $125 for system and $50 per base plate.

 

[ridgeway]

Will include a pair of complementary tweezers incase a jacket needs re situated.

 

[ridgeway]

I have several additional 100 ct 6mm base trays available to go with the jacket loading system to add capacity.

 

[ridgeway]

Ttt

 

[Talon]

Do you ever plan to do any .30 caliber sets?

 

[ridgeway]

Yes...I have a 210 hole system available in 30 cal. Can have a 100 hole available in a couple days

 

[Talon]

Do you have a photo and dimensions of the 210 for 30 caliber? I'll pm you later and you and I can discuss it.

 

[ridgeway]

Yes, they are 9.25 "x 9.75"

 

[ridgeway]

Let's get the ones I have on hand and printed sold! New price just to get them shipped out. After this, will be made to order only.

Qty 2 - 6mm 210 hole $150 for system
Qty 1 - 30cal 210 hole $150 for system
Qty 1 - 6mm 100 hole $75 for system

 

[ridgeway]

Putting my 100 round trays to good use. Can't imagine handloading cores into jackets, haha