Bullet coating service

[PeterB]

thanks for the advice Cody, i will try the heating up method and not so much canuba. the only way i could get canuba down here in aus was in a block form and i then scrape an amount of into the container prior to tumbling. bit primative, but thats the way we are down here, ( carnt even be trusted with a semi), also mate how long should i tumble the things for waxing.
regards pete

 

[Cody Richardson]

Mine have been for about 45-60 seconds. Roughly the time it takes to put a new batch of bullets to get moly coated. Check with NECO they may be able to export there carnuba, there's is a fine lab grade

 

[jo191145]

Cody, have you considered going full Monty and offering WS2 coating also?

 

[Cody Richardson]

Haven't considered it but wouldn't be opposed to it. I've never personally tired it. How much is it compared to moly and HBN?

 

[jo191145]

http://lowerfriction.com/product-page.php?categoryID=1

Looks like a pound goes for $54.00. Thats cheaper than the pound I bought five years ago I think.
Contrary to the application procedures on the linked page it can also be applied just like HBN. No wax like moly.


PS If you don't know about lowerfriction.com then you really need to know about lowerfriction.com

 

[Cody Richardson]

That's is where I order my HBN from! Never read about the WS2. I might have to get some and try.

 

[Cody Richardson]

Bump!

 

[barnesuser28]

Cody, would it be possible to coat bullets such as Barnes with hbn? I would wonder if it would build up in the grooves. Does a load have to be retuned when the bullets are coated? Does velocity increase? Fouling decrease?

Riley

 

[Cody Richardson]

Riley, from my experience with moly and HBN you actually want a *slight* build up, this is what acts as the lubricant. If you take it all out it takes about 20 rounds to foul the barrel with the coating so I don't scrub my barrel until when I plan to store the rifle for a period if time. with coating you actually need to increase powder to obtain the velo you had with naked bullets. There is substantial decrease in copper fouling with coatings. I clean about every three matches instead of every matches. I could go longer, I see no sines of deceeased accuracy when I begin to clean. But the Barnes are no problem to coat! I think I've done all the major brands and they all coat great with my system.

 

[barnesuser28]

Do you have a minimum amount of bullets that has to be sent? Sorry if it was posted earlier in this thread.

 

[Cody Richardson]

No minimum but the more you send saves on shipping!

 

[Cody Richardson]

Still accepting orders!

 

[Jeffvn]

bump. I'm accumulating bullets to send. I will be using your hBN coating services shortly.

Jeffvn

 

[Cody Richardson]

bump. I'm accumulating bullets to send. I will be using your hBN coating services shortly.

Jeffvn

No problem! Just shoot me a PM when you are ready to ship. Thanks for the bump!

 

[Cody Richardson]

Still accepting orders!

 

[Cody Richardson]

Bump! Most seasons are about to begin so go ahead and get your bullets coated for the coming season! Moly and HBN still avlaible.

 

[Cody Richardson]

Bump! Still accepting orders!

 

[Cody Richardson]

Bump for business! Still taking orders.

 

[mgx1138]

Cody just did a batch of old 68 Euber bullets for me. Fast, easy and the bullets look great!

 

[Cody Richardson]

Bump