SOLD Brux 284 barrel for a Borden action

SilhouetteShooter

Gold $$ Contributor
I have a couple barrels chambered by Short action custom for a Borden BRMXD that I am selling.
They are all Brux 31” long 8 twist in strait 284 NT. Reamer print attached. 1.25 strait
1st barrel unfired. $575
2nd has 1184 rounds and has been fitted with EC tuner (not included) $200 shipped

Will also consider a barrel trade for Bat B, M , or Panda action. In 6.5x47L, 284 or a 6BR BRA.
 

Attachments

  • IMG_4652.jpeg
    IMG_4652.jpeg
    202.6 KB · Views: 64
  • IMG_4647.jpeg
    IMG_4647.jpeg
    544.3 KB · Views: 64
  • IMG_4645.jpeg
    IMG_4645.jpeg
    366.7 KB · Views: 55
  • IMG_4644.jpeg
    IMG_4644.jpeg
    500.2 KB · Views: 74
  • IMG_4660.jpeg
    IMG_4660.jpeg
    408.9 KB · Views: 84
  • IMG_4649.jpeg
    IMG_4649.jpeg
    469.6 KB · Views: 78
Last edited:
More
 

Attachments

  • IMG_4651.jpeg
    IMG_4651.jpeg
    451.1 KB · Views: 29
  • IMG_4650.jpeg
    IMG_4650.jpeg
    317.6 KB · Views: 24
  • IMG_4646.jpeg
    IMG_4646.jpeg
    197.8 KB · Views: 27
  • IMG_4643.jpeg
    IMG_4643.jpeg
    302.1 KB · Views: 27
Are all Borden bmrxd’s the exact same within reason to be able to swap barrel (prefit)? I’m talking about a tolerance tighter than a go no go gauge. If that is not the case I would have to have that reamer or my smith would to fit it on the barrel? Lots to learn for me here for sure but want to understand what I would have to do to get it going on my action.

Thx,
K
 
Are all Borden bmrxd’s the exact same within reason to be able to swap barrel (prefit)? I’m talking about a tolerance tighter than a go no go gauge. If that is not the case I would have to have that reamer or my smith would to fit it on the barrel? Lots to learn for me here for sure but want to understand what I would have to do to get it going on my action.

Thx,
K
Let me ask my smith, but I’m pretty sure Borden is in the same class as a Bat on tolerance
 
Are all Borden bmrxd’s the exact same within reason to be able to swap barrel (prefit)? I’m talking about a tolerance tighter than a go no go gauge. If that is not the case I would have to have that reamer or my smith would to fit it on the barrel? Lots to learn for me here for sure but want to understand what I would have to do to get it going on my action.

Thx,
K
My gunsmith said to the best of his knowledge (and he is being modest) all the Borden BRMXD are the same unless someone is using a recoil lug. These do not.

If someone was to buy this, and worried about fit, please don’t. I would refund all your money, and you can ship it back.
Shawn
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,274
Messages
2,215,646
Members
79,518
Latest member
DixieDog
Back
Top