SOLD Brux 284 barrel for a Borden action

[SilhouetteShooter]

I have a couple barrels chambered by Short action custom for a Borden BRMXD that I am selling.
They are all Brux 31” long 8 twist in strait 284 NT. Reamer print attached. 1.25 strait
1st barrel unfired. $575
2nd has 1184 rounds and has been fitted with EC tuner (not included) $200 shipped

Will also consider a barrel trade for Bat B, M , or Panda action. In 6.5x47L, 284 or a 6BR BRA.

 

[SilhouetteShooter]

More

 

[SilhouetteShooter]

I will sell both barrels together for $625! One trip to the ups store!

 

[SilhouetteShooter]

Up

 

[KLove]

Are all Borden bmrxd’s the exact same within reason to be able to swap barrel (prefit)? I’m talking about a tolerance tighter than a go no go gauge. If that is not the case I would have to have that reamer or my smith would to fit it on the barrel? Lots to learn for me here for sure but want to understand what I would have to do to get it going on my action.

Thx,
K

 

[Kurz]

They are all Brux 31” long 8 twist in strait 284 NT. Reamer print attached. 1.25 strait
1st barrel unfired. $575

We should assume that the chamber is the .284 NT? (what is it) The reamer print is marked DM.

It's threaded for the Borden but is there a crown?

 

[SilhouetteShooter]

There is a crown, I’ll show that when I get back.
NT-No turn for lapua brass.

 

[SilhouetteShooter]

Are all Borden bmrxd’s the exact same within reason to be able to swap barrel (prefit)? I’m talking about a tolerance tighter than a go no go gauge. If that is not the case I would have to have that reamer or my smith would to fit it on the barrel? Lots to learn for me here for sure but want to understand what I would have to do to get it going on my action.

Thx,
K

Let me ask my smith, but I’m pretty sure Borden is in the same class as a Bat on tolerance

 

[SilhouetteShooter]

Confirmed that Bordens are swappable.
crown attached.

 

[SilhouetteShooter]

Are all Borden bmrxd’s the exact same within reason to be able to swap barrel (prefit)? I’m talking about a tolerance tighter than a go no go gauge. If that is not the case I would have to have that reamer or my smith would to fit it on the barrel? Lots to learn for me here for sure but want to understand what I would have to do to get it going on my action.

Thx,
K

My gunsmith said to the best of his knowledge (and he is being modest) all the Borden BRMXD are the same unless someone is using a recoil lug. These do not.

If someone was to buy this, and worried about fit, please don’t. I would refund all your money, and you can ship it back.
Shawn

 

[SilhouetteShooter]

Double checked the headspace. Best I could tell,