Broken case neck

[spclark]

Life would be boring if everything went right all the time.

 

[Mustanggt7]

It's been almost a month and I've tried every thing and then some and it seems to be "welded" to the chamber wall. I guess I'll have to send it to a smith to take care of it for me. Thanks for the help fellas.

 

[1lnbrdg]

Find the appropriate size tap and see if you can get that started into the neck? I've used this before for separated case heads.

 

[NorCalMikie]

Send it back to the folks that "made the die". If they can't get the problem solved, they will probably send you a new die. One without all the scratches and gouges from trying to get the stuck brass out.

 

[338 dude]

So far no more problems with cases coming apart. I will be less aggressive with my turning. Is it proper to bump the shoulder back a bit till it chambers if it won't after neck turning?

would it chamber before turning ?
If it will not chamber after turning Necks your problem is the neck it sounds like it is either the diameter or the length are you trimming your brass to the proper length ? measure fired case neck diameter add .001 for spring back and a loaded round and check the difference that is your neck Clearance