I got a Blake barrel with relatively little use about 30". The plan is to drop about first 10" inches and chamber in 7mm-08 for Savage action to be used for hunting.
The problem I found that floating pilots on my carbide reamers don't fit in to muzzle end, look like just about .0005 or so to big. Mic. show .276 (it's may bit off just a little)
Any suggestions?
The problem I found that floating pilots on my carbide reamers don't fit in to muzzle end, look like just about .0005 or so to big. Mic. show .276 (it's may bit off just a little)
Any suggestions?