BEST PRIMING TOOL (NOT SINGLE LOAD) WITH TRAY

[group therapy]

Just curious, but why don't you want a single load model?

I feel like as long as the seating tool has "good feel" to it there is little to no advantage to the single load, however, I have never had a single load tool and most of the "premium" tools are single load. part of the issue here is I don't know what I don't know bryant

 

[dcali]

I feel like as long as the seating tool has "good feel" to it there is little to no advantage to the single load, however, I have never had a single load tool and most of the "premium" tools are single load. part of the issue here is I don't know what I don't know bryant

I wouldn't dismiss them then. Before I got one I was pretty sure I didn't want one. But my RCBS tray model was such a pain in the ass and of such poor quality that I finally chucked it and bought a 21st century single load model expecting to pay a price in speed/convenience. I was surprised to find that I actually prefer the single loading. The inconvenience of single loading is no where near what I expected and it doens't slow me down materially, and I actually prefer not screwing around with the trays. Loading 200 cases is not much of a chore. I'm also a bit paranoid about primer safety, so there's an appeal to me in not having a tray full of primers pointed at the back of my hand.

The are are only two reasons not to get a single load in my view. One is if you have arthritis or for whatever reason have trouble picking up primers repeatedly. The other is if you are loding huge numbers of cases, in which case, I wouldn't use any hand priming system. Otherwise, give them a look. I only have experience with the 21st century single load, but it's a very good tool. It's much, much better than the lee and RCBS tray loaders, which I've also used.

 

[Medic505]

Lee bench mount

I just ordered one of these to try. I hopes it's better thought out than their new and improved hand primer. Only thing I don't like about the Forster primer is you have to change set up switching from .223 to .308.

 

[Peebles24]

I have the frankfort arsenal tool, only one i have ever had. So i cant say anything about any others. I can say the frankfort is heavy, feels like it will last a lifetime. I can definitely feel if a primer pocket is different tension. Depth is easy to adjust. I use a km primer pocket reamer so my pockets are one set depth, I set my primer tool and the primers are all set to same tension. They tray has the litlle bumps in the bottom so dump on primers give it a few shakes and they are all sitting in the proper orientation.

I think it is a great tool, is it the best, i have no idea but im very happy with it.

 

[J F Johannes]

I can definitely feel if a primer pocket is different tension.

Uh Oh! Did you say "tension" Here comes the Guffster

 

[C.E.Smith043]

I recently picked up the frankfort arsenal tool. It is substantially higher quality than any other hand primer I've used (RCBS x2, Lee x2, Hornady)

I got one also, have been very pleased with it

 

[3Ackleys]

I have used the Frankford for over a year and it is WAY better than RCBS, LEE or Hornady. Fast and precise.

 

[Woodchk]

I have used several different ones I finally bought the 21st century would purchase again .

 

[TIMO]

The K&M tool is great if you don't mind one at a time. Been running one for years. You won't find a better tool in its price range.

Paul

I agree, the K&M is great, I also use a Forster when I load LC brass.
Tim

 

[Puzzaz01]

I have both the Lee and Lyman tools. I prefer the Lyman, as it feels sturdier, and it seats primers superbly IMHO.

Plus plus plus for the Lyman.

Darrin

 

[Steve morgan]

hello all. wanting some opinions on what is the best (in your opinion of course) priming tool that has a tray. I don't "want" to load primers in the tool individually. I shoot br (short and long range) and if there is a difference, on paper, by loading them (the primers) one at a time in the priming tool (and the tool that that entails), id like that opinion too. thanks in advance. bryant

hello all. wanting some opinions on what is the best (in your opinion of course) priming tool that has a tray. I don't "want" to load primers in the tool individually. I shoot br (short and long range) and if there is a difference, on paper, by loading them (the primers) one at a time in the priming tool (and the tool that that entails), id like that opinion too. thanks in advance. bryant

Rcbs bench model works best for me

 

[Ccrider]

Lee is faster. But boy does the 21st century seem more precise. Makes you feel like you are seating them all exactly the same.

 

[MN50Shooter]

Lee is faster. But boy does the 21st century seem more precise. Makes you feel like you are seating them all exactly the same.

I uniform all of my primer pockets, and all of my primers are seated fully, and to the same depth. I could see inconsistencies with primer depths and seating, if the pockets are not uniformed.

If the pockets aren't uniformed, it won't matter a great deal, what seating tool is used.

 

[1shot]

I uniform all of my primer pockets, and all of my primers are seated fully, and to the same depth. I could see inconsistencies with primer depths and seating, if the pockets are not uniformed.

If the pockets aren't uniformed, it won't matter a great deal, what seating tool is used.

Logically, this make sense to me. I uniform my P pockets as well, so in theory, any seating tool that put the primer to the bottom of the cup will be doing its job. I'm currently using the RCBS hand primer, so am I missing something here?

Lloyd

 

[Dusty Stevens]

Youre missing the feel. Sure both will shove a primer in there but to feel when the anvils touch takes a good tool. The off the shelf tools wont do it no matter how much we wish they will. You get a machine such as the 21st century, turned from a billet of stainless steel with an adjustable stroke down to the thousandth its a whole nother level from a cast piece thatll flex twice that just running the primer in. Its just a whole nother level that may not be necessary for you- i prefer the nicer things myself but its just a personal preference

 

[dcali]

I'm not convinced that the feel matters, but you can definitely get a more precise feeling of how easily the primer seated with the quality tools (as opposed to the cheaper pot metal ones made by the big reloading companies).

 

[jimmymac]

...yet, if you read Tony Boyer’s book he says he used a cheap Lee Auto Prime.

I use a Sinclair single feed. It’s a nice tool, but when my hands are hurting the whole operation feels clumsy. Getting old is fun.

 

[Tod Hendricks]

http://forum.accurateshooter.com/threads/new-bald-eagle-primer-seater.3874110/

I’m still using the bald eagle with no complaints.

 

[Down South]

RCBS Universals here. Spring loaded jaws so no shell holders to deal with.

I use the same one.

 

[F Class John]

I use the Primal Rights CPS. Uses Dillon feed tubes, has amazing feel and has great mechanical leverage which is good for my bad hands. It’s also really fast once you get accustomed to it.