we have a 26in barrel and load is 43gr h-4350 with 80gr berger going 3585fps. this is on a custom action. barrel is 1in8 twist.Anybody load this combo yet? Looking for load info/ starting points for H4350 4831sc and h1000
The 80 and the 85.5 reacted much differently for me.we have a 26in barrel and load is 43gr h-4350 with 80gr berger going 3585fps. this is on a custom action. barrel is 1in8 twist.
RL26 in my 23” barrel will push the 95’s over 3200 without issues.I loaded some up today with h4831sc 43 gr gave me 3095 FPS and h4350 at 39.5 gave me 3103 FPS this is out of a 26 inch barrel. I was really hoping to push them close to 3300. Maybe I will try and get my hands on some 80.5 fullbores and see how they work. The barrel only has 31 rounds down it so hopefully it will speed up. I will also look for some rl26
That sounds more like it. I’ve had great results with the slower powders, including 7977 which had single digit SD/ES numbers but a touch slower.Not sure what happened earlier I had slight ejector marks at both those loads. I decided to load them up again and had no sign of pressure so I started loading gradually and ended up running out of case capacity with 4831sc running a little over 3200 so I worked up with h4350 again and made it to 42.2gr still no pressure signs and it’s running 3350. I ran out of daylight so I will continue tomorrow but if. I can find a good load around 41.8-42.2 running 3320-3350 I will be happy!