All,
We are making 3 new heavy 6mm non-VLD. We are using a tangent ogive, which will make these bullets much less sensitive to seating depth than VLD. The BC will be slightly lower than the VLD but if they group well with little or no seating depth tweaking then they will be good for those who do not want to adjust for the VLD.
I need shooters with good equipment to test these bullets so that we can choose which weight will become a permanent part of our line. ,This is how the 22 cal 73 gr BT came to be)
Each selected shooter will receive one box,100 bullets) of the following at no charge:
New 6mm 105 gr BT
New 6mm 107 gr BT
New 6mm 108 gr BT
Each bullet has been made using the same die. You will need an 8" twist to stabilize these bullets.
To be selected as a tester you need to send a list of the following details to Michelle Gallagher at michelle.gallagher@bergerbullets.com or fax to 714-447-5478:
Action brand:
Barrel brand and twist:
Cartridge barrel is chambered for:
Cases to be used:
Powder to be used:
Primers to be used:
Matches with top 3 finish using this gear:
OR
Grouping ability of this gear with similar bullet:
Your name, shipping address and phone number:
It is important that you submit your details only if you will have the ability to test these bullets by June 15th. The deadline for these submissions is Tuesday May 29th so gets yours in right away.
Regards,
Eric Stecker
We are making 3 new heavy 6mm non-VLD. We are using a tangent ogive, which will make these bullets much less sensitive to seating depth than VLD. The BC will be slightly lower than the VLD but if they group well with little or no seating depth tweaking then they will be good for those who do not want to adjust for the VLD.
I need shooters with good equipment to test these bullets so that we can choose which weight will become a permanent part of our line. ,This is how the 22 cal 73 gr BT came to be)
Each selected shooter will receive one box,100 bullets) of the following at no charge:
New 6mm 105 gr BT
New 6mm 107 gr BT
New 6mm 108 gr BT
Each bullet has been made using the same die. You will need an 8" twist to stabilize these bullets.
To be selected as a tester you need to send a list of the following details to Michelle Gallagher at michelle.gallagher@bergerbullets.com or fax to 714-447-5478:
Action brand:
Barrel brand and twist:
Cartridge barrel is chambered for:
Cases to be used:
Powder to be used:
Primers to be used:
Matches with top 3 finish using this gear:
OR
Grouping ability of this gear with similar bullet:
Your name, shipping address and phone number:
It is important that you submit your details only if you will have the ability to test these bullets by June 15th. The deadline for these submissions is Tuesday May 29th so gets yours in right away.
Regards,
Eric Stecker