I went to cabelas today to pick up a few things . I picked up a box of 105 a maxes and box of 107 matchkings . I have been wanting to try these to see how they shot compared to the Berger vld hunting bullets and the vld BT targets bullets . I wanted to pick up a pound of RL-15 but they didn't have any . So I bought a pound of 4895 to try . I've had good luck with Varget and better luck with RL-15 . I loaded up 4 Berger match 4 Amax and 4 matchkings with 31.3 grains of 4895 . My first three shots with the Bergers was in the low .2s and the fourth jumped about a .25 inch. Then I shot two Amaxes in the same hole and the other couple jumped out . Same with the matchkings . I was kinda scratching my head a little . Well I picked up the rifle and headed back to the reload bench . That's when I noticed my front action screw was almost out of the stock . I didn't shoot any more after I tightened it back down but I think there is some promise there . I was getting right around 2900-2930 with the three different bullets . With low Es . Just wondering if anyone else is using this powder besides fire forming thanks