urbanrifleman
Site $$ Sponsor

Anyone have experience with the new Bald Eagle rest?
https://www.bullets.com/products/Triangle-Windage-Rest-Cast-Iron/BE1153
Of course the rest is not new, the windage adjustment is. I never had problem with the windage adjustment on mine. Depending on the caliber you shoot, the triangle cast iron will handle most hard kicking calibers quite well. I tried a slingshot and it needed to much adjustment with heavy recoil calibers. I'm a Neo fan now but the only difference my old Bald Eagle and my NEO is speed to move from sighter to record!View attachment 1027645
Anyone have experience with the new Bald Eagle rest?
https://www.bullets.com/products/Triangle-Windage-Rest-Cast-Iron/BE1153
Watch your sling studs on the bag,they will eat up a bag.
^^ThisI think by far the best bang for the buck.
I believe the Sinclair speed srcrew's are 3/8"x 16 or 1/2" x 20 threads so only the aluminum Bald Eagle's will work as they are 3/8"x16, the cast Bald Eagles model's are 1/2"x13.Does the Sinclair speed screw fit?
I believe the Sinclair speed srcrew's are 3/8"x 16 or 1/2" x 20 threads so only the aluminum Bald Eagle's will work as they are 3/8"x16, the cast Bald Eagles model's are 1/2"x13.
Yes it does. I had speed screws on mine.Does the Sinclair speed screw fit?
The cast one I own is most definitely 1/2" x13, I just looked again at bullets website unless I'm missing something?? the info on the aluminum ones says 3/8"x16 and the info on cast says 1/2" x13. Excluding the big fifty of course. I wish my cast slingshot did have 3/8"x16 I would like to have the speed screws.I have both an aluminum and cast iron Bald Eagle and both have 3/8X16TPI threads.
The cast one I own is most definitely 1/2" x13, I just looked again at bullets website unless I'm missing something?? the info on the aluminum ones says 3/8"x16 and the info on cast says 1/2" x13. Excluding the big fifty of course. I wish my cast slingshot did have 3/8"x16 I would like to have the speed screws.
Drilling to 5/8" and then making a bushing sounds like the ticket. I think it's my best option. Thanks.Make a threaded bushing and glue it in that one leg. Thread the outside and tap the inside 3/8-16. Id use brass or bronze and probably drill the rest out and tap it bigger to 5/8 or so just to make it easier. That cast iron machines like butter.
The cast one I own is most definitely 1/2" x13, I just looked again at bullets website unless I'm missing something?? the info on the aluminum ones says 3/8"x16 and the info on cast says 1/2" x13. Excluding the big fifty of course. I wish my cast slingshot did have 3/8"x16 I would like to have the speed screws.