jpattonr
Silver $$ Contributor
My grandfather is getting out of the shooting sports and is offloading quite a few items. From his workshop:
Anschutz Model 54 stock for 3-or 4-position shooting, homemade with one of the most unusual grain effects I've seen in a while. At first glance, the grain is fairly simple, however by rotating the stock 45 degrees the 'hidden' grain becomes obvious and pops very well. The stock includes an 11" rail (approx 7/16" accessory slot) that is very slightly proud of the wood to protect the stock, glass bedded with the recoil lug installed, and metal bushings imbedded for the receiver screws. Due to the rail's position, the front receiver screw is installed and included, as well as the rear screw. The front can be milled out from the rail if required. The cheekpiece height is adjustable with the rotating wheel. There is no butt plate installed but it is ready to accept an adjustable butt plate. The butt end of the stock measures 6 3/4" tall and has three 5/8" holes milled for the adjustable length butt plate installation. A few measurements:
Weight: 5lb 7 1/2 oz
Overall Length: 27"
Approx Length of Pull: 11"
Forearm Width: 2 1/4"
Barrel Channel Width: 1 1/8"
Asking $250 shipped.
Anschutz Model 54 stock for 3-or 4-position shooting, homemade with one of the most unusual grain effects I've seen in a while. At first glance, the grain is fairly simple, however by rotating the stock 45 degrees the 'hidden' grain becomes obvious and pops very well. The stock includes an 11" rail (approx 7/16" accessory slot) that is very slightly proud of the wood to protect the stock, glass bedded with the recoil lug installed, and metal bushings imbedded for the receiver screws. Due to the rail's position, the front receiver screw is installed and included, as well as the rear screw. The front can be milled out from the rail if required. The cheekpiece height is adjustable with the rotating wheel. There is no butt plate installed but it is ready to accept an adjustable butt plate. The butt end of the stock measures 6 3/4" tall and has three 5/8" holes milled for the adjustable length butt plate installation. A few measurements:
Weight: 5lb 7 1/2 oz
Overall Length: 27"
Approx Length of Pull: 11"
Forearm Width: 2 1/4"
Barrel Channel Width: 1 1/8"
Asking $250 shipped.
