Again Updated** last one Panda question

[1shot]

I have 5 Panda actions, all purchased brand new from Kelblys directly. All the bolts feel like they run on ball bearings. (lubed of course) I have never hear of the problems you are encountering. Give Ian a call and they will make it right with you, right away, no questions ask.
I hope this helps,

Lloyd

 

[jimmymac]

IMO, If the action is not in a stock you really can’t tell. My guess is that it is fine. I’d stock it and shoot it.

 

[Sandstorm]

My guess is that it is fine. I’d stock it and shoot it.

Exactly...Its gonna be just fine

 

[Leadfarmer]

So James got the action. Said all is well and that they are going to nitride the bolt for me at their cost. You guys weren't kidding about the customer service. I like the atlas enough without the customer service. So thats the cherry on top to continue to buy and use those actions.

 

[Leadfarmer]

My invoice says that the trigger hanger was installed backwards and that's why it was hard to open. I didn't I stall the hanger nor did I look at it. Problem solved!

 

[AlNyhus]

My invoice says that the trigger hanger was installed backwards and that's why it was hard to open. I didn't I stall the hanger nor did I look at it. Problem solved!

Must have been a double notched hanger?

 

[Alex Wheeler]

Unless they changed recently, you cant install them backwards.

 

[Leadfarmer]

Unless they changed recently, you cant install them backwards.

Interesting. First Panda I have owned. Just reading off the invoice

 

[Leadfarmer]

Is it Nitrided and smoother or just Nitrided.

They are nitriding the bolt for me on the house, and it's being sent to Zack Donovan, so I won't know for a little bit. I'll ask him when it gets to him though.