?? adding plates or fixtures to a sporter stock to make it act like a varminter??

[Ogre6br]

Hi
I am having a Standard sporter Synthetic stocked Tikka white tail,595) into a 6 BR.

Is there any way that I can add plates or sliders or other fittings or fixtures to the stock to enable the stock to act more like a varminter/BR comp stock?

I want to be able to give myseld the best chance of sighting in and assessing loads without having to get another stock for the rifle.

I an thinking of making/installing a seperate ferrule into the forearm of the stock so I can attach some flat allum plate to the forearm to enable the rifle to ride that bags on my rest better.

I am unsure how to proceed with this idea- can anyone offer some suggestions on how to accomplish this? is there a way of forming or molding the alum plate to aloow it to perform on the bags to it's best ability- while supporting the factory stock perpendicular to the plate.

I am unsure on how to add/modify the rear of the stock so it can ride a bunny ear bag to it's best ability.
I realise this will not be as good as a true competition stock -I'm trying to make the best with my limited resourses.

Hope you can help- pics would be great.

THank you

LAter
P

 

[Preacher]

Harts has a Accuracy assist that clamps to the fore end of a stock for good BR control.
A lot of folks swear by them......

 

[Kav]

leave your one stud as is...drill and bed a threaded pillar in the stock for a second,similar to a PSS or LTR) and then build a plate with two beveled alan heads and you are set. I usually bed the plate to the stock to give it a bit more stability then shape it all purty like.