A cheap solution to disassemble a Savage barrel.

[SKWERLZ]

I can't believe this thread is still going on, All you need is to lock the barrel in a barrel vise, And loosen the nut with the wrench. So simple a Cave Man could do it!

On a few savages that were stupid tight I held everything in place with a barrel and action vise and that made it easier to pop the nut lose.
Because sometimes the nut tries to spin with the action.

 

[2644ever]

1. Put the barrel in a barrel vise.
2. Take a monkey wrench and remove the nut.
3. Throw that nut in the trash.
4. Buy a hex nut from my store.
5. Use Crescent wrench or 1.25 inch flat wrench to reinstall new nut.
6. Live happy life.

View attachment 1681896

Beautiful. How much do they cost? And would it be possible to ship them to Frogland without any mention of gunsmithing or firearms part whatsoever on the customs form?

 

[2644ever]

Beautiful. How much do they cost? And would it be possible to ship them to Frogland without any mention of gunsmithing or firearms part whatsoever on the customs form?

Well, I found your site. Most interesting. Is the nut among the parts you are allowed to ship overseas?

 

[Rat Rifle]

1. Put the barrel in a barrel vise.
2. Take a monkey wrench and remove the nut.
3. Throw that nut in the trash.
4. Buy a hex nut from my store.
5. Use Crescent wrench or 1.25 inch flat wrench to reinstall new nut.
6. Live happy life.

View attachment 1681896

^^ THIS ^^ … use HEAT, make it easy !