870 wingmaster stock stripping
- Thread starter dp45acp
- Start date
Aviation paint stripper usually works pretty good. It helps a bit to scuff it well with course sandpaper first. I suppose it helps the stripper penetrate and get underneath the finish. Use gloves and proper safety equipment. That stuff don't play.
Take off the butt plate/pad. Get some Zip Strip, lay the stock on plastic wrap (large piece), pour it all over the wood and then wrap it up and let sit in sun light or some place warm 24hrs. Remove the plastic and scrap off the gel. Still have bad spots reapply and do it again. Then sand with 80 grit paper and then 120/ 240 and if good appliy finish.
Mikey
Mikey
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.