7-6.5PRCW load data

[SDDasher]

I asked this on another thread, but I thought to ask again, if you all dont mind.
Can (should) one use ADG 7-6.5PRCW brass in wheeler .319NT chamber? I have a chance to buy a bunch of that brass at a very good price and I was wondering if there would be an issue. Thanks in advance

I use ADG brass with a .314 chamber W/O any issues running 2860ish using N555. The brass has been turned using an AutoDod. I shoot in temps ranging from 40-95+ degrees and had very few “clickers” with this brass in the two seasons of use. The same friend with the AutoDod also has a roll-sizer so I just borrow that if I need to.

 

[Nvcnvc]

thank you. I am trying to avoid turning necks. I read that ADG brass fits without turning in a .316 neck. Do you think that the fact that my neck is .319 will not make the neck expand too much? I hope I am asking my question correctly.

 

[gmr4]

I asked this on another thread, but I thought to ask again, if you all dont mind.
Can (should) one use ADG 7-6.5PRCW brass in wheeler .319NT chamber? I have a chance to buy a bunch of that brass at a very good price and I was wondering if there would be an issue. Thanks in advance

Yes.. you will not need to turn on a .319 and you may find the extra neck clearance is a good thing…

 

[Nvcnvc]

thank you

 

[Sandstorm]

I use it and it works real well..No issues here.

 

[BAT M 284]

Here's my load Data 55.9 Grains N555
180 Berger hybrid, lapua 6.5 Brass necked up to 7mm.seating on the lands.Muzzle velocity is 2860 .Redding S die 7 6.5prcw
Full length sizer.seating die Redding 7 saum competition . Redding. .309 tin bushing .Rifle is very accurate I shoot steel plate matches. I shot 4x6 steel plates consistently at 855 and 830
Yards.my Reamer is a Manson 7prcc.
All work was done by Joseph Jones at
Shaw Armament powder Springs Georgia.

 

[Blackrockcustom]

I build 2 one with a carbon six barrel 24" with a Weatherby 307 action. peak 44 stock, rem age tenon. I started load work up with 140 gr vld. 3 shot group .050" 3050 fps. next to load up 190 gr A-Tip.

second rifle is hells canyon armory barrel, rem 700 action, standard tenon thread, peak 44 stock.

Waiting on ADG to send more brass.