• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

6PPC Reamer?

HTSmith

Silver $$ Contributor
I am wanting to buy my own 6PPC Reamer and go gauge. (I have to hire my chambering work) Looking for suggestions on a design and hopefully a print. I use Lapua brass, 68 Gr Barts Boat Tails, and N133 powder. Wanting to stick with a ,263 Neck. Something close to "standard" (whatever that is) that would maybe be in stock would be good. Thanks for any help.
 
I suggest you call JGS. The old standby 1045 had a .262 neck if I recall, but I know they have at least one other version with different neck diameters, and shorter throats. Boat tails weren't very popular when the 1045 was designed, but not so today. I bet they have a reamer on the shelf that will shoot very well for you.
 
Mine is a Henrickson 262 neck 45 FB. I shoot mostly 68g BT's. I don't have a print for it. Sig Goodling ordered it and I am sure Henrickson would have the info on it. Most guys are ordering a 268 neck these days....

Regards
Rick
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,298
Messages
2,215,711
Members
79,516
Latest member
delta3
Back
Top