6mm Creedmoor dies

[spudgun]

Looking for a small base die for 6mm Creedmoor.

Does anyone know who makes one?

Checked with RCBS, Hornady, Redding and don't see one anywhere.

Thanks

 

[MislMan]

the 6mm Creedmoor brass is the same as 6.5 Creedmoor only necked down to 6mm. Might find 6.5 CM dies for what you need (Sizing the base)

 

[spudgun]

the 6mm Creedmoor brass is the same as 6.5 Creedmoor only necked down to 6mm. Might find 6.5 CM dies for what you need (Sizing the base)

Thant might work, if I remove the expander ball.

 

[Rob01]

Yup if you find a small base bushing die for 6.5 Creedmoor you can use the proper bushing for the 6mm and do all the sizing in one step.

 

[muvef]

Yup if you find a small base bushing die for 6.5 Creedmoor you can use the proper bushing for the 6mm and do all the sizing in one step.

Redding makes a type S bushing die.

Just order the correct bushing for neck tension.

They also sell a 6mm expander ball to replace the 6.5 ball.

 

[Rob01]

I don’t even use the expander ball with the Type S and a bushing.

 

[Dusty Stevens]

Any of the 308 size small base dies will work. Some even use the open top 45acp dies for this. You could use a 30-06 small base die. That may be your easiest find if you dont have a gunsmith that can make you one right quick. The best thing to use is a ring die from @Uthink Uknow on here

 

[Enosiophobia]

RCBS makes a small base for 6.5 Creed.

 

[spudgun]

RCBS makes a small base for 6.5 Creed.

I have one for the 6.5CM. Wanting to know if someone made one for the 6mm CM.

But looks like I can work around it by the suggestions.

Thanks