Double check those measurements, but if a loaded round measures .264. Sizing the case to anything larger than the finished OD will do nothing. Bushing must be smaller than loaded neck diameter in order to provide any neck tension at all.My chamber is for 0.272 neck.
My resized, barely turned brass (0.012 thick) is 0.262 (standard FL dies)
My loaded ammo is 0.264
My fired brass is 0.269
From what I have been reading here, I'm thinking I need bushing dies, but what bushing? 0.266 or 0.267?
thanks!
Edit - turned brass is 0.012 not 0.0012