6BRDX easy way to form brass

[S&sprecisionTx]

I found a super easy way to form 6 BRDX brass for you guys who like to do wild cats and not to run the same old thing that everyone else is running

Either by new 6 Dasher or once fired 6 Dasher brass and run it through your fulling sizer it will bump it down super easy without having to do the fire forming or any other forming I will post pictures when I get another batch figured I'd pass the info around

 

[DJSBRS]

How consistent is your head space for your whole batch after conversion? If you converted 200 pieces of Dasher into BRDX, how many cases are within .001 headspace and how many cases would you lose with shoulder collapse?]

Thank you kindly for your detailed response.

DJ

 

[S&sprecisionTx]

How consistent is your head space for your whole batch after conversion? If you converted 200 pieces of Dasher into BRDX, how many cases are within .001 headspace and how many cases would you lose with shoulder collapse?]

Thank you kindly for your detailed response.

DJ

That is a very good question I don't know next time I do a batch I will keep a track of it

The only time I had collapse cases is when they were fired several times but if you start with brand new zero collapsed ones

 

[Ranger188]

I think I'll stick to blowing out brass, rather than crushing it.
Never a problem with hundreds of 6BRDX doing it "the same old thing that everyone else is running"
Sometimes the wheel doesn't need to be reinvented.
Good luck, on your way.
Have you shot this new brass and how many firings on it?

 

[shoot4fun]

@DJSBRS hydro formed by BRDX brass. When I got it back I didn't do anything but chamfer and deburr before loading. Brand new barrel and here's a sample of my first time at the range with it. Once I got it zeroed all are five-shot groups at 100 yards (no load development yet).