6BRA Ladder Test with/wo Tuner

[retired]

only if you can find that one guy that wants them.
i have about 15k plus some mags
wolf and tula come out of the same factory in russia.
not likely to be seen again soon.

So your telling me this pile I have here is worth a lot of money?? LOL

 

[BartsBullets]

Bart its always interesting how primers like many thing affect a rifles willingness to shoot and I'm curious what you will find down the road with this & I wish you success but I'm going to say this out loud even though this primer is showing even more mellow transition from spot to spot this concerns me in my own short range testing when moving to 1000 yards. my gut tells me this will struggle further out, what I mean is it will shoot everything you throw at it good but nothing great, I hope your findings are to the contrary but that is my 2 cents. it will struggle to go sub 2" vertical and stay round that's my projection . thanks for the updates...

Shawn Williams

Shawn

It held up in LG!

https://imgur.com/a/vrpwW

Bart

 

[Northridge]

Shawn

It held up in LG!

https://imgur.com/a/vrpwW

Bart

Cool Bart 600 yards I'm assuming ?

how did she group

 

[BartsBullets]

Cool Bart 600 yards I'm assuming ?

how did she group

Yes 600 at Swainsboro! Wind was pretty sporty had one shot turn a .8 into a 2.6

Agged a 2.3 for 5th place group
1st score
1st overall LG

 

[gunsandgunsmithing]

Shawn

It held up in LG!

https://imgur.com/a/vrpwW

Bart

Congrats Bart and Congrats to my friend Larry!

 

[Matt P]

Alex,

I just checked that one. It has a carbide weight on the firing pin. The spring starts to compress at 20 lbs 5oz. At the full cocked position it 21 1/2 lbs.

Bart

Without taking this to far away from the OP, how much extra weight "makes a difference", and what is the minimum spring pressure for consistant ignition.
Regards
Matt P

 

[dkhunt14]

Without taking this to far away from the OP, how much extra weight "makes a difference", and what is the minimum spring pressure for consistant ignition.
Regards
Matt P

It's not only spring pressure, but weight of firing pin, amount of fall and the type primer being used. Matt

 

[BartsBullets]

It's not only spring pressure, but weight of firing pin, amount of fall and the type primer being used. Matt

Don’t forget firing pin protrusion! That would cover it!

Bart

 

[Matt P]

Bart and DK,
That was more my question, extra weight on the pin. These are Rem style actions and wanting to reduce the bolt lift.
Just want to know how low can you go ??
Matt P

 

[jp]

any reports of today's match at coolacres?

 

[BartsBullets]

any reports of today's match at coolacres?

HG results
https://imgur.com/a/HqNaN

LG Result
https://imgur.com/a/pfqd1

2 Gun
https://i.imgur.com/TGka7uM.jpg