6br die

[Dgd6mm]

Who makes an off the shelf FL non bushing 6br Norma die?
Looking for something less expensive.
Thanks Don Dunlap

 

[Kracken McGraw]

Forster makes one with their higher set expander.

 

[DJL]

Hornady makes a set that are very reasonable cost wise.

 

[ghostrider272]

Redding

 

[Big Mc]

Who makes an off the shelf FL non bushing 6br Norma die?
Looking for something less expensive.
Thanks Don Dunlap

Comes down to Chevy or Ford. All will get the job done. Tommy Mc

 

[RussellJ]

Who makes an off the shelf FL non bushing 6br Norma die?
Looking for something less expensive.
Thanks Don Dunlap

Redding 91317

This is from the Precision Shooting Magazine article that Glenn Burroughs wrote.

Perhaps one contributor to the confusion has to do with reamer specifications… and there are certainly many different versions of reamers for the 6mm BR. Besides using the standard SAAMI specs, reamer specifications are also created based on the desires and whims of the gunsmith, or the customer, or from measurements from the brass that will be used. But with all of this variation there is still only one version of loading dies available for the 6mm BR, and until recently they were usually labeled “6mm BR Remington”. The sizing dies for both cartridges are identical

 

[Cfshooter]

Trying to get away from donuts?

I ask because I am looking and waiting for the Forster FL due to get back in stock so I can do the same.

 

[AlNyhus]

Who makes an off the shelf FL non bushing 6br Norma die?
Looking for something less expensive.
Thanks Don Dunlap

I have a new Redding #91317 die that I'm going to be listing here in the next few days, along with quite a few other Redding, Wilson and Harrels dies .

Feel free to PM me here if you have any interest, prior to the listing.

Good shootin' -Al

Shop Rifle & Shotgun Reloading Supplies | Dies | Bullets | Hulls | Wads | Powder - Precision Reloading

Shop online for shotshell and metallic reloading supplies, shooting supplies, metallic presses, rifle reloading components, shotshell reloading components, shooting accessories, rifle reloading brass and Bullets.

www.precisionreloading.com

 

[Kracken McGraw]

Trying to get away from donuts?

I ask because I am looking and waiting for the Forster FL due to get back in stock so I can do the same.

I don’t know if they actually do or not, but Forster shows the die for sale on their site. The have a extra $17 option to hone it out to your specs too.

 

[Dgd6mm]

Trying to get away from donuts?

I ask because I am looking and waiting for the Forster FL due to get back in stock so I can do the same.

Actually yes and no. I've read, and not sure if it's so, but to FL size with a non bushing die before you turn necks.

Thank you Al for the offer.