6BR Die Confusion

[Mike TackleBerry]

I'm new to reloading the 6BR, I want to use redding components specifically the competition bullet seating die and their FL Bushing sizing die but are the 6BR Norma dies the same as the 6BR Remington dies?

 

[Mike TackleBerry]

These are the dies id like to use. https://www.precisionreloading.com/cart.php#!l=RE&i=36317

 

[RussellJ]

I'm new to reloading the 6BR, I want to use redding components specifically the competition bullet seating die and their FL Bushing sizing die but are the 6BR Norma dies the same as the 6BR Remington dies?

Look at the attachment on post #5, it will answer your question.

6BR Go gauge question

I going to have a REMAGE barrel made up soon and was looking for a Go gauge in 6 BR "Norma". I found quite a few 6 BR Remington, but no Norma. I know there is a difference in the cases as shown below, but would it be safe to use a Remington Go gauge to set the barrel? I've looked at the...

forum.accurateshooter.com

 

[Mike TackleBerry]

Look at the attachment on post #5, it will answer your question.

6BR Go gauge question

I going to have a REMAGE barrel made up soon and was looking for a Go gauge in 6 BR "Norma". I found quite a few 6 BR Remington, but no Norma. I know there is a difference in the cases as shown below, but would it be safe to use a Remington Go gauge to set the barrel? I've looked at the...

forum.accurateshooter.com

That was a excellent read, Thank you.

 

[Charlie-NY]

I looked at Redding's web site for the 6mm BR die description. It indicated 6mmBR Remington (Norma). I die fits all apparently. That's odd because many people say that the Lapua version in largeer in diameter at the .200" location.

 

[Bill Norris]

I looked at Redding's web site for the 6mm BR die description. It indicated 6mmBR Remington (Norma). I die fits all apparently. That's odd because many people say that the Lapua version in largeer in diameter at the .200" location.

Been using the 6BR Rem die for years with my 6BR Norma. It must be the same.

 

[Bc'z]

I'm new to reloading the 6BR, I want to use redding components specifically the competition bullet seating die and their FL Bushing sizing die but are the 6BR Norma dies the same as the 6BR Remington dies?

Look at Redding website paying particular attention to part #'s for specific dies and aplication.
I just did the same thing a couple weeks ago.
The difference is in .200 line and neck length.
Try posting an ad in classified for what your looking for.

Special thanks to @maxscm for the Redding FL die w/brass to confirm measurements, and @yukonal for the S type die set w/comp seater.

 

[Mike TackleBerry]

Look at Redding website paying particular attention to part #'s for specific dies and aplication.
I just did the same thing a couple weeks ago.
The difference is in .200 line and neck length.
Try posting an ad in classified for what your looking for.

Special thanks to @maxscm for the Redding FL die w/brass to confirm measurements, and @yukonal for the S type die set w/comp seater.

That helped me alot, I order #36317 Die kit and it appears to be the right set, Thanks Again.