6br and 95 Bibs .Need load data.

[johnr]

I have a 10 twist 6br and some 95 Bibs. I was looking for starting loads using varget, reloader 15 and vv135.I can get the varget load of off the 6br page ,but I have had very little success finding loads for the other 2 powders. I will be very thankful for any help.

Johnr

 

[johnr]

No one shoots 95 bibs in a 6mmbr?

 

[WyleWD]

No one that I know in the competitions that I go to use them in a 6br with a 10 twist barrel. Are you wanting to compete with them, varmint hunt or just try them.

I'd be concerned with them being very stable beyond (maybe) 300yds. WD

 

[tclaunch]

I`d try or should say start out at 30.5 grains RL15 and work up. I have a 6BR barrel I use 100 grain Clinch River bullets in and the load was 31.1 grains. The 95 FB has a long bearing surface so be watching for pressure. Bib has the talent and components like no other custom maker out there. I wish he would go mainstream and come up with a new heavy 6mm pill. He could get real busy really quick.

I shoot with a guy who has a 6BR 10 twst and the 90 gr Berger is awesome for him. I think he tied the score record at a 192 or 193 on the IBS target at 600 This in a local club thing not IBS

 

[johnr]

Just wanting to shoot from 100yds to 300 yds.I have a several pounds of vv 135 and re 15 .I know the burn rate of varget and re 15 are close ,but I don't have any data on re 15 or vv 135.

 

[Booter]

I shoot 95 BIB FB in a 10 twist 6BR and started N-135 at 28.5 gr and went up from there. Did not find that this powder delivered the accuracy provided by H4895. Have not tried Reloader 15. All loads with Lapua brass and 205M primers loaded 0.015 off the lands.

 

[Woodman]

I have had good groups in 6BR 1/10 twist with 32 gr of Varget. My 1/8 Dasher likes 34 gr of Varget and the 95 Bib flat base bullets. George

 

[johnr]

This is to the person who asked about buying some 95 bibs from me .I only bought 500 and I think you can buy a 100 from them.