6 x 47 Lapua freebore????

[Phil]

What are you guy`s using for freebore in your 6 x 47 Lapua with the Berger 105`s?????


Phil.

 

[alf]

.100"......

 

[SealT5]

.104" for 105 hybrids

 

[pat fulghum]

.100

 

[Phil]

Thanks guy`s....................


Looks like the .100-.105 area is where to be......

 

[nvbroncrider]

I'm also building one and have been pondering the same question.

Asking same question the reamer I'm looking at is a .108" puts a 105 AMax at 2.700" a 87 Vmax @ 2.630" a 108ELDM @ 2.722" and a 105 RDF @ 2.745" wondering if I should run it out to .126 fore a freebore.

 

[Phil]

I'm also building one and have been pondering the same question.

Asking same question the reamer I'm looking at is a .108" puts a 105 AMax at 2.700" a 87 Vmax @ 2.630" a 108ELDM @ 2.722" and a 105 RDF @ 2.745" wondering if I should run it out to .126 fore a freebore.

With the dimensions given, where does the base of the bullet sit in each???

Above any doughnut that may or may not appear???

 

[Phil]

The man that smithed this rifle told me .105 on his freebore........

http://forum.accurateshooter.com/threads/reloader-16-6x47l-promising.3913910/

 

[swd]

Varmint silhouette rifle, Phil?

 

[missed]

0.105" for 105g hybrids. That was supposed to put the base of the bullet just below the base of the neck. I don't have the exact dimensions with me

 

[SealT5]

Hope this helps. I'm a visual person.

.104" freebore by Beanland.

105 Berger Hybrid
2.150" BTO
2.760" OAL

 

[nvbroncrider]

With the dimensions given, where does the base of the bullet sit in each???

Above any doughnut that may or may not appear???

That's how they look.

 

[nvbroncrider]

Here is the reamer print I'm looking at.

 

[Phil]

Thank you Gentlemen for the pictures, they are a BIG help......

 

[Phil]

Varmint silhouette rifle, Phil?

MAYBE.........................................